Loading...

AQUIP AT WORK

Aquip (uh-kwip) is a patented, enhanced media filtration system for industrial stormwater applications. This stormwater treatment BMP removes fine particulates and dissolved pollutants in a simple and easy-to-use configuration. Aquip is typically installed above ground with a single pump station.

Features:

  • Removes particulates and dissolved pollutants
  • Uses passive filtration, no chemicals, no backwash
  • Open top for easy access and operation
  • Operates unattended, 24/7
  • Gravity flow-through system, no moving parts
  • Simple and safe effluent sampling
  • Available structures include steel, concrete and plastic
View Project Profiles
Request Aquip Technical Brief
Installation Photos

Aquip is available in several performance levels, each specifically designed for the reduction of stormwater pollutants such as suspended solids, turbidity, heavy metals (including dissolved metals), organics (e.g. BOD, volatile hydrocarbons, PCBs, PAHs), and nutrients (e.g. nitrogen and phosphorus). Targeted metals include copper, zinc, iron, lead, aluminum, nickel, cadmium, and other metals.

aquipPROJECT PROFILES

MARINE TERMINAL, SEATTLE, WASHINGTON

At 70-acres, and one of the largest barge terminals on the West Coast, this company adopted StormwateRx treatment to successfully target zinc, copper, TSS, and turbidity.

PROFILE: MARINE TERMINAL, WA

SHIP BUILDING AND REPAIR, WA

A large ship fabrication facility in Anacortes, WA reduced concentrations of zinc, copper, suspended solids and turbidity to below stormwater benchmarks with StormwateRx.

PROFILE: SHIP BUILDING & REPAIR, WA

RAILYARD, WA

BNSF Railway’s South Seattle hub has three drainage sub-basins; two of which required treatment for TSS, copper, zinc and turbidity to meet industrial general permit requirements.

PROFILE: RAILYARD, WA

ROOFING MANUFACTURER, OR

A pacific northwest roofing shingle manufacturer was able to reduce concentrations of copper and zinc to the benchmarks with turn-key installation.

PROFILE: ROOFING MANUFACTURER, OR

METAL FABRICATOR, CA

A family run LA company dealing in steel, cast iron, aluminum, copper, brass, and all other metals targets removal of pollutants from stormwater using passive treatment.

PROFILE: METAL FABRICATOR, CA

SANITARY AND TRASH SERVICE, WA

This award-winning recycling and garbage collection company installed stormwater filtration to meet MS4 and Industrial General Permit requirements.

PROFILE: SANITARY & TRASH SERVICE, WA

SHIPYARD AND DRYDOCK, WA

Washington ship and boat repair facility installed a self-contained filtration system for pre-treatment to sanitary sewer of hydroblast water, and industrial stormwater.

PROFILE: SHIPYARD & DRYDOCK, WA

ALUMINUM EXTRUDER, OR

This international company upgraded stormwater pollutant controls at three of its pacific northwest facilities and is in full permit compliance with benchmarks.

PROFILE: ALUMINUM EXTRUDER, OR

NON-FERROUS METAL RECYCLER, OR

This 4-acre non-ferrous metal recycling facility located in Portland, Oregon required an above-ground configuration system into existing facilities.

PROFILE: NON-FERROUS METAL RECYCLER, OR

COAL FIRED POWER PLANT, WV

US electricity generator uses StormwateRx process for hotspot industrial stormwater runoff from the site preventing pollutants from reaching the Ohio River.

PROFILE: COAL FIRED POWER PLANT, WV

SCRAP METAL RECYCLER, VA

Davis Industries, a scrap metal recycling facility in Lorton, Virginia, installed the most environmentally protective treatment system in the Chesapeake Bay region.

PROFILE: SCRAP METAL RECYCLER, VA

BOATYARD & YACHT SERVICE, WA

Seattle based Canal Boatyard, a family owned operation committed to keep the Puget Sound clean, installed an Aquip® enhanced stormwater filtration system.

PROFILE: BOATYARD & YACHT SERVICE, WA

zinc-b-gone PROJECT PROFILES

LUBRICATING OIL DISTRIBUTOR, OR

PROFILE: LUBRICATING OIL DISTRIBUTOR, OR

ALUMINUM EXTRUDER, OR

This international company upgraded stormwater pollutant controls at three of its pacific northwest facilities and is in full permit compliance with benchmarks.

PROFILE: ALUMINUM EXTRUDER, OR

PROJECT IMAGES

2017-04-25T17:06:21+00:00
error: Content is protected !!